CORROSION |
||
|
Stress Corrosion Corrosion Fatigue Fretting Corrosion Heat Treatment |
||
Treatment of titanium and titanium alloys.
Attack on titanium surfaces is generally difficult to detect. Titanium is by nature, highly corrosion resistant, but it may show deterioration from the presence of salt deposits and metal impurities, particularly at high temperatures. Therefore, the use steel wool, iron scrapers, or steel brushes for cleaning or for the removal of corrosion from titanium parts is prohibited. If titanium surfaces require cleaning, hand polishing with aluminum polish or a mild abrasive is permissable, if fiber brushes only are used and if the surface is treated following cleaning with a suitable solution of sodium dichromate. Wipe the treated surface with dry cloths to remove excess solution, do use a water rinse.
|
||
| Corrosion of ferrous metals. | ||
| One of the most familiar types of corrosion is ferrous oxide,.. | ||
| Corrosion of aluminum and aluminum alloys. | ||
| Corrosion attack on aluminum surfaces is usually quite obvious, | ||
| Corrosion of magnesium alloys. | ||
| Magnesium is the most chemically active of the metals used,. | ||
| Treatment of titanium and titanium alloys. | ||
| Attack on titanium surfaces is generally difficult to detect | ||
| Protection of dissimilar metal contacts. | ||
| Certain metals are subject to corrosion when placed in contact with other metals | ||
| Processes and materials used in corrosion control | ||
| Aircraft parts are almost always given some type surface finish | ||
| Chemical treatment. | ||
| Parco Lubrizing in a chemical treatment for iron and steel parts | ||
|
|
||
|
Home l Site map l Contact us l Links |
||
|
Copyright @ 2007./rev-2010. |
||